TCS FBI6110 Product Information page 11

03/2013
camera selec- explanation
tion list
Drop-Down- Here, all available TCS cameras can be called directly.
 The camera selection list shows all video sources, which were acti-
menu over the
image field (e.g.
post, side en-
trance, ...)
 You can select the names of the video sources freely
Trigger the controling
toolbar explanation
With these buttons, a control function can be sent to the TCS:BUS
and thus, a switching process at another TCS:BUS
Button 1
...
triggered.
...
The status indication (if available, see graphic below) is influenced by
...
the control functions, which were sent by the Video Streamer and other
...
TCS:BUS
...
Operation and indication elements are created by the administrator in
the corresponding configuration menu. (see Control, page 17)
Button 10
The status indication is updated every 2 seconds.
Status indication
Button 1 Button 1
FBI or FBI or
extent extent
TM
Switching and Switching and
switching state 1 switching state 2
ON/OFF OFF/ON
Note
Between control functions, which are offered by the TCS:BUS®, also products of the series ex-
tent can be integrated in the Video Streamer. It is possible to get information on the switching
state between the usual switching acts. The status of the sensors of the extent series can be
displayed directly on the Video Streamer.
TCS TürControlSysteme AG, TCS Hotline Germany: hotline@tcsag.de
vated in the menu video sources in order to be displayed in the
camera selection list.
(max. 20 characters).
The order of the cameras is the order in which the cameras were
created in the configuration overview (see Video sources, page. 16).
®
devices to the TCS:BUS
Button 1
FBS
TM
only indication
switching state
ON
11
®
.
Button 1 Button 1
FBS BRE
switching
only indication
without status
switching state
indication
OFF
®
device can be
Subject to technical changes.
PI_FBI6110-uk 2 A
®