Samsung UN50AU8000FXZA E-Manual page 10

Turning on the TV with a mobile device
Settings General
You can turn on the TV using a mobile device connected to the same network as the TV.
This function is available with a mobile device connected to the TV through the SmartThings app or the Apple AirPlay
function.
Apple AirPlay may not be supported depending on the model or geographical area.
Connecting an IP control device to the TV
Settings General
You can connect an IP control device to the TV remotely to manage your IP device.
To use this function,
Turning this feature on may allow other IP control devices to control your TV. We recommend turning this feature on only if
an authorized third-party custom controller is installed and configured specifically for a Samsung TV and if your Wi-Fi
network is password protected.
This function may not be supported depending on the model.
Allowing to connect a wireless network
Settings General
You can enable the connection to Wi-Fi.
To connect a wireless network, the function must be active.
Allowing to connect the Wi-Fi Direct
Settings General
When using Wi-Fi Direct, you can connect directly with other devices and share content without using a wireless
router.
To maximize the network performance when a 6 GHz access point is connected, turn off the
This function may not be supported depending on the model.
Changing the name of the TV
Settings General
You can change the name of the TV on the network. Select
name.
Network
Network
Power On with Mobile must be turned on.
Network
Network
System Manager
Expert Settings Power On with Mobile
Expert Settings IP Remote
Expert Settings Wi-Fi
Expert Settings Wi-Fi Direct
Device Name
User Input at the bottom of the list and change the
- 10 -
Wi-Fi Direct
Try Now
function.