Care And Cleaning - GE UNC15NP Manual

Care And Cleaning

Cleaning the Outside
The stainless steel door and door handle can be cleaned
with a commercially available stainless steel cleaner.
Cleaners with oxalic acid such as Bar Keepers Friend
Soft Cleanser™ will remove surface rust, tarnish and
small blemishes.
Cleaning the Condenser
The condenser has fins and tubes that can become
clogged with dirt and lint.
To clean:
1.
2. Remove the kickplate by removing the 2 screws in
the sides of the metal grill, then 2 additional screws
from the front of the kickplate. Pull kickplate forward
to remove. To access top of condenser, remove door
by removing the hinges from the cabinet. Open the
water filter access door and remove 2 screws in the
filter cover. Remove hinge cover plate on opposite
side of hinge by firmly pressing in and sliding down.
Pull filter cover forward to remove.
3. Vacuum the surface to remove all dust and lint.
NOTICE
Do not dent the fins.
4. Re-install the filter cover, hinge cover plate, kick plate
and door.
49-1000610 Rev. 2
not use appliance wax or polish on the stainless steel.
2
Screws
1
25