Lexmark Z22 User Manual page 41

Steps to basic printing
Maintaining your printer
Troubleshooting
Appendix
Index
Printer has a paper jam
If the paper is lodged too far into the printer and can't be removed:
Press the Power button to turn the printer Off.
1
2 Press the Power button to turn the printer back On.
If the printer does not eject the page, turn the printer Off.
3
4 Pull firmly on the paper to remove it. If you cannot reach the
paper because it is too far into the printer, raise the front
cover and pull the paper out of the printer.
Close the front cover.
5
6 Press the Power button to turn the printer On.
Resend your document to print.
7
Document prints with mistakes or poor quality
Print is too dark or smudged
• Make sure the paper is straight and unwrinkled.
• Let the ink dry before handling the paper.
• Make sure the Paper Type setting in the printer software matches
the type of paper loaded in the printer.
Troubleshooting
41