Casio EX-Z800BE User Manual page 166

RETRY POWER ON
SYSTEM ERROR
The card is locked.
There are no files.
There are no
printing images.
Set up DPOF.
There is no image
to register.
This card is not
formatted.
This file cannot be
played.
This function
cannot be used.
The lens came into contact with an obstruction while moving.
The camera will turn off automatically when this message
appears. Remove the obstruction and turn power back on
again.
Your camera system is corrupted. Contact your retailer or a
CASIO authorized service center.
The LOCK switch of the SD or SDHC
memory card loaded in the camera is in the
locked position. You cannot store images to
or delete images from a memory card that is
locked.
There are no files in built-in memory or on the memory card.
There are currently no files specified for printing. Configure
the required DPOF settings (page 111).
The setup you are trying to save is for an image that cannot
be saved as a user BEST SHOT scene.
The memory card loaded in the camera is not formatted.
Format the memory card (page 144).
The file you are trying to access is corrupted or is a type that
cannot be displayed by this camera.
This message will appear part way through an operation
when you attempt to use a function that is not allowed in
combination with another function.
166
LOCK
Appendix