Table of Contents
Advertisement
3.
Connect the USB
cable to the camera.
The back lamp should
light red, indicating that
charging has started.
The back lamp will go
out when charging is
complete.
It takes about
110 minutes to achieve
a full charge. Charging
may take longer
depending on charging
conditions.
Back Lamp Operation
Lamp Status
Lit Red
Flashing Red
Off
4.
After charging is complete, disconnect the USB cable from the camera
and then unplug the adaptor from the power outlet.
[USB/AV]
port
Small
connector
Making sure that the
is towards the lens side, connect the cable to the camera.
Description
Charging
Abnormal ambient temperature,
USB-AC adaptor problem, or
battery problem (page 122)
Charging complete
17
USB-AC adaptor
USB cable
(included with camera)
mark on the USB cable connector
Back lamp
Quick Start Basics
Advertisement
Table of Contents
