Haier 9 Series User Manual page 33

Installation
EN
Waiting time
To the maintenance free lubrication oil is located in the capsule
of the compressor. This oil can get through the closed pipe
system during slanting transport. Before connecting the
appliance to the power supply you have to wait 2 - 5 hours so
that the oil runs back into the capsule.
Electrical connection
Before each connection check if:
► power supply, socket and fusing are appropriate to the rating plate.
► the power socket is earthed and no multi-plug or extension.
► the power plug and socket are strictly according.
Connect the plug to a properly installed household socket.
WARNING!
To avoid risks a damaged power cord must be replaced by the customer service (see warranty card).
29