Table of Contents
Advertisement
System diagnostics and indicator codes
This section describes the diagnostic indicators on the system front panel that display the system status during system startup.
Status LED indicators
NOTE:
The indicators display solid amber if any error occurs.
Figure 66. Status LED indicators
Table 72. Status LED indicators and descriptions
Icon
Description
Drive indicator
Temperature
indicator
Electrical
indicator
Memory indicator The indicator turns solid amber if a
Condition
The indicator turns solid amber if
there is a drive error.
The indicator turns solid amber if
the system experiences a thermal
error (for example, the ambient
temperature is out of range or
there is a fan failure).
The indicator turns solid amber
if the system experiences an
electrical error (for example,
voltage out of range, or a failed
power supply unit (PSU) or voltage
regulator).
memory error occurs.
Corrective action
● Check the System Event Log to determine if the
drive has an error.
● Run the appropriate Online Diagnostics test.
Restart the system and run embedded
diagnostics (ePSA).
● If the drives are configured in a RAID array,
restart the system, and enter the host adapter
configuration utility program.
Ensure that none of the following conditions exist:
● A cooling fan has been removed or has failed.
● System cover, air shrouds, or back filler bracket
has been removed.
● Ambient temperature is too high.
● External airflow is obstructed.
If the problem persists, see
Check the System Event Log or system messages
for the specific issue. If it is due to a problem with
the PSU, check the LED on the PSU. Reseat the
PSU.
If the problem persists, see
Check the System Event Log or system messages
for the location of the failed memory. Reseat the
memory module.
If the problem persists, see
System diagnostics and indicator codes
7
Getting
help.
Getting
help.
Getting
help.
77
Advertisement
Table of Contents
