Electrolux WB6-20 User Manual page 43

Do not clean the washer with bleach or oxygenated water to avoid damaging the logos and the control panel of
the machine.
We recommend you to use ECOLAB product to clean the washer.
Do not input colorant in the machine with very hot water. Very hot water react with the colorant, which creates a
very corrosive solution. The colorants must be input with cold water or warm water which temperature doesn't ex-
ceed 50 °C (122 °F).
Note!
Chlorine introduced in a rinsing bath at a temperature of more than 40 °C (104 °F) affects stainless steel. The
chlorometric degree should be between 47°and 50°. (1° chlorometric degree corresponds to 3.17 g (0.11 oz)
of active chlorine). The chlorine concentration should not exceed the ratio indicated, or the stainless steel
may be affected. Check the concentration ratio of your products. The javellization should be of 10 to 15 cm³ /
kg (0.28 to 0.42 cu in/lb) of linen.
User manual
Warning
Warning
43