Connections - Pioneer DDJ-FLX4 Instruction Manual

Connections

• Be sure to disconnect the USB cable before connecting different
devices or changing connections.
Refer to the instruction manuals for devices to be connected.
• For connection to PC/Mac or a mobile device, be sure to use the USB
cable specified below.
– To connect to a device with a USB Type-C port: use the USB cable
supplied with the unit
– To connect to a device with a USB Type-A port: use a USB cable
certified to the appropriate standard with a length of 3 m or less
– To connect to a device with a Lightning terminal: use an Apple
certified cable with a length of 3 m or less
• When using a USB hub, be sure it's a product recommended by the
manufacturer of your PC/Mac.
• When connecting to a PC/Mac, you can use the unit with a single
connection to your computer (USB bus power). This unit can't be
used with USB bus power in the following situations:
– The power supply capacity of the USB port on your PC/Mac is too
low.
– Your PC/Mac is connected with other devices.
– The impedance of the connected headphones is lower than 32 Ω.
– A mono-jack plug is connected to the headphones output terminal.
• When using the unit with a mobile device, you can connect a USB
power adapter or mobile battery to power the unit.
• When using the unit with a mobile device with a Micro USB Type-B
port, connect it via Bluetooth.
When connecting with a USB cable, we can't guarantee proper
operation of the unit.
37
En