Table of Contents
Advertisement
Wireless Screen
This screen is displayed when the Wireless menu option is clicked.
Data - Wireless Screen
Wireless Network
WSC PIN Code
Network Type
SSID
Domain
Channel No.
Figure 26: Wireless Screen
It displays the WSC PIN code which can be used for WiFi
Protected Setup function.
This determines the type of wireless communication used by the
Network Camera.
•
If you have an Access Point, select Infrastructure.
•
Otherwise, select Ad-hoc.
This must match the value used by other devices on your wireless
LAN.
Note! The SSID is case sensitive.
Select your region from the drop-down list.
•
In Infrastructure mode, this setting is ignored. The Network
Camera will use the Channel set on the Access Point.
•
For Ad-hoc mode, select the Channel you wish to use on your
Network Camera. Other Wireless stations should use the same
setting.
•
If you experience interference (shown by lost connections
and/or slow data transfers) you may need to experiment with
different channels to see which one is the best.
35
Advertisement
Table of Contents
