Change Settings In Uefi/Bios Setup Utility; What Is Uefi/Bios Setup Utility; Open The Uefi/Bios Setup Utility; Change The Startup Sequence - Lenovo IdeaPad 1 Series Manual

Hide thumbs Also See for IdeaPad 1 Series:
Table of Contents

Advertisement

Change settings in UEFI/BIOS setup utility

This section introduces what is UEFI/BIOS and the operations you can perform in its setup utility.

What is UEFI/BIOS setup utility

UEFI/BIOS is the first program that runs when a computer starts. UEFI/BIOS initializes hardware components
and loads the operating system and other programs. Your computer may include a setup program (setup
utility) with which you can change certain UEFI/BIOS settings.

Open the UEFI/BIOS setup utility

Step 1.
Turn on or restart the computer.
Step 2.
When the Lenovo logo appears on the screen, press F2 repeatedly.
Note: For computers with hotkey mode enabled, press Fn + F2.

Change the startup sequence

You may need to change the startup sequence to allow the computer to start from another device or a
network location.
Step 1.
Open the UEFI/BIOS setup utility.
Step 2.
Navigate to the Boot menu.
Step 3.
Follow on-screen instructions to change the order of devices under Boot Priority Order.
Note: You can also change startup sequence temporarily without opening the setup utility. To do so, start
the computer. When the Lenovo logo appears, press F12 (or Fn + F12) repeatedly.

Change hotkey mode

Step 1.
Open the UEFI/BIOS setup utility.
Step 2.
Select Configuration ➙ Hotkey Mode and press Enter.
Step 3.
Change the setting to Disabled or Enabled.
Step 4.
Select Exit ➙ Exit Saving Changes.

Set passwords in UEFI/BIOS setup utility

This section introduces the types of passwords that you can set in the UEFI (Unified Extensible Firmware
Interface) or BIOS (Basic Input/Output System) setup utility.

Password types

You can set various types of passwords in the UEFI/BIOS setup utility.
Password type
Administrator password
User password
Pre-requisite
No
The administrator password must be
set.
Usage
You must enter it to start the setup
utility.
You can use the user password to
start the setup utility.
.
Chapter 3
Explore your computer
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents