Page 1
164mm While we recommend you mount your Vocaster DM1 on a stand using the included microphone stand clip, it’s designed for rumble free recording so you can use the microphone hand-held for on-the-go recording.
Page 2
The Vocaster DM1 mic clip has a removable adaptor you can insert or remove to fit your microphone stand. No, the Vocaster DM1 will not be damaged if you send it 48V accidentally, or if you need to enable 48V for all channels on your interface.
Page 3
Polar Pattern The polar pattern shows how sensitive the microphone is in the areas around the Physical Characteristics microphone. The angle 0° refers to speaking into the end of the Vocaster DM1. Mounting Standard 5/8”; 3/8” adaptor supplied 1,000 Hz...
Page 4
Accessories and Spare Parts To get spares or support for your Vocaster DM1 please either contact our Spares & Support teams, or speak to your local distributor: Contact our Spares Team: support.focusrite.com Contact your local distributor: stockists.focusrite.com focusrite.com Tell the world...