Lenovo ThinkPad X61 7673 User Manual page 46

Replacing memory
4. Remove the battery.
5. Loosen the screws that hold the memory-slot cover in place 1 ; then
6. If two SO-DIMMs are already installed in the memory slot, remove one
7. With the notched end of the SO-DIMM toward the contact edge side of
8. Reinstall the memory-slot cover and tighten the screws
9. Reinstall the battery.
10. Turn the computer over, and reconnect the ac adapter and the cables to
36
®
ThinkPad X61 Tablet Service and Troubleshooting Guide
remove the cover 2 .
of them to make room for the new one by pressing out on the latches on
both edges of the socket at the same time. Be sure to save the old
SO-DIMM for future use.
the socket, firmly insert the SO-DIMM into the socket at an angle of
about 20 degrees 1 ; then pivot it downward until it snaps into place
2 .
the computer.