Nexus STANDARD MP V3 User Manual
  1. Manuals
  2. Brands
  3. Nexus Manuals
  4. Metal Detector
  5. STANDARD MP V3
  6. User manual

Nexus STANDARD MP V3 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1

Advertisement

Table of Contents
loading

Related Manuals for Nexus STANDARD MP V3

Summary of Contents for Nexus STANDARD MP V3

  • Page 2: Table Of Contents

    Table of contents General description: Pg. 1 Assembly and preparation: Pg. 2 - 3 Control functions: Pg. 3 - 7 General operation and Set-Up: Pg. 7 Full manual set-up: Pg. 7 - 9 Search method: Pg. 9 - 11 Tips: Pg. 11 - 12 Care of the Standard MP: Pg.

  • Page 3: General Description

    MP stands for Mineral Power. The Nexus Standard MP V3 may be the most efficient IB metal detector for use in heavy mineral ground conditions and strong magnetite.

  • Page 4: Assembly And Preparation

    Assembly & Preparation Assembly & Preparation The Nexus Standard MP is supplied boxed and ready for quick assembly by simply attaching the two lower stem poles to the top one, tightening the collars and attaching the coil to the lower stem...

  • Page 5: Control Functions

    The Nexus Standard MP has an internal loudspeaker so headphones are not absolutely essential. For any headphones that have a volume control, ensure that this is set to MAXIMUM and use the Nexus Standard MP Volume knob on the control box to set the volume level. Controls...
  • Page 6 Volume and Power On/Off switch. This knob sets the volume of the tone and responses and it is used also to turn on/off the Nexus Standard MP V3. This knob should always be used for setting the volume. Any volume control on the headphones should be set to MAXIMUM.
  • Page 7 discrimination will be reduced and some non-ferrous targets will be recovered as such at shallower depths. RGB LED Meter The RGB meter is based on LED technology and provides a reliable visual discrimination analysis in All-Metal Mode and VCO Multi tone mode. The RGB meter indicates only Non-Ferrous targets in three basic colours - Green, Orange and White/Purple.
  • Page 8 These two controls are used to set the balance of the Nexus Standard MP V3 to suit the soil conditions on any given site. Threshold This knob sets the level of the threshold tone. The Nexus Standard MP V3 is meant to operate in audible Threshold level at all times when All Metal Mode is in use.

  • Page 9: General Operation And Set-Up

    Full Manual Set-Up Firstly, ensure that no metal is in close proximity to the coil. It is also advisable to carry out the tuning and setting up of the Nexus Standard MP V3 away from other metal detectors or potential sources of electronic interference.
  • Page 10 * Keeping the RGB in battery check mode for a long time will drain the batteries. Holding the Nexus Standard MP V3 with the coil well above ground level, adjust the Threshold knob to obtain a faint audible tone setting. Adjust the Volume knob to set a comfortable level (remembering to set any adjustable headphone volume control to MAXIMUM).

  • Page 11: Search Method

    Finally, check again the threshold for audible level and volume for comfortable level. The Nexus Standard MP V3 is now set up for the particular site conditions and it is ready for use. Search Method With the Nexus Standard MP V3 set up and ready, the coil should be swung smoothly from side to side, a little above the ground surface.
  • Page 12 fast. It is strongly recommended that the MP V3 is used in All Metal mode with audible level in the Threshold so that the deepest targets can be registered. Suggested operating heights for the standard coils are: 13” DD coil: 4” (100 mm) minimum above ground surface. 10”...

  • Page 13: Tips

    Nexus Standard MP V3 will allow effective operation under all conditions and for all types of targets. Site conditions will significantly affect depths and performance.

  • Page 14: Care Of The Standard Mp

    Care of the Nexus Standard MP All metal detectors are precision instruments and require careful handling to ensure they remain in good working order. Avoid dropping, impacts or violent shaking of the detector and protect it while transporting. The detector should not be used in very wet weather conditions, without protecting the control box and the battery.

  • Page 15: Troubleshooting

    4. I only plug the search coil and detector does not work after that. Make sure that it is the correct search coil for your Nexus model. The search coils for Nexus Standard MP V3 are interchangeable only with coils manufactured for the MP range, MP V1, MP V2 and MP V3.
  • Page 16 Do not carry any smartphones with you while using the MP V3. 7. The detector stopped working during the rain. Nexus detectors are not water or weather proofed. Knowing that we strongly recommend that no Nexus metal detector model is used in rain.

Table of Contents