Chapter 2. Setting Up Your Computer; Connecting Your Computer - Lenovo ThinkCentre M55p 8811 User Manual

Chapter 2. Setting up your computer

Before you begin, make sure you set up your computer in the best possible work
area that suits your needs and the kind of work you do. For more information,
refer to Chapter 1, "Arranging your workspace," on page 1.
Note: Read "Important safety information" on page v before you set up your

Connecting your computer

Use the following information when connecting your computer. Look for the small
connector icons on the back of your computer.
If your computer cables and connector panel have color-coded connectors, match
the color of the cable end with the color of the connector. For example, match a
blue cable end with a blue connector or a red cable end with a red connector.
Note: Depending on your model type, your computer might not have all of the
© Lenovo 2006. Portions © IBM Corp. 2005, 2006.
computer. The precautions and guidelines will help you work safely.
connectors that are described in this section.
1. Check the position of the voltage-selection switch on the rear of the computer.
Use a ballpoint pen to slide the switch, if necessary.
v If the voltage supply range is 100–127 V ac, set the switch to 115 V.
v If the voltage supply range is 200–240 V ac, set the switch to 230 V.
2. Connect the keyboard cable to a Universal Serial Bus (USB) connector.
Note: Some models will have keyboards with a fingerprint reader. After you
setup and turn on your computer, refer to the Access Help online help
3