Viessmann VITODENS Operating Instructions Manual page 38

Scanning
Calling up information
Subject to the components connected
and settings made, you can call up cur-
rent temperatures and operating condi-
tions.
The extended menu splits the informa-
tion into groups:
■ "General"
■ "Heating circuit 1"
■ "Heating circuit 2"
■ "Heating circuit 3"
■ "DHW"
■ "Solar"
■ "Reset data"
Note
If heating circuits have been named (see
chapter "Naming heating circuits") the
assigned name is displayed.
Detailed options for calling up data on
individual groups can be found in chapter
"Options for calling up data".
Extended menu
1.
2. "Information"
3. Select the group.
4. Select the required information.
Calling up the solar yield in conjunc-
tion with solar thermal systems
Extended menu
1.
2. "Solar energy"
The solar energy yield is shown in dia-
grammatic form.
38
The flashing line on the graph indicates
that the current day is not yet over.
Solar energy
4.0
0
We Th Fr
kWh Th 03/05/12
Select with
Note
Further options fro calling up data, e.g.
for the solar circuit pump hours run, can
be found in the extended menu under
"Information" in the "Solar" group.
Resetting data
You can reset the following data:
■ Burner hours run.
■ Fuel consumption.
■ In conjunction with a solar thermal sys-
tem:
Solar energy yield, solar circuit pump
hours run and hours run output 22.
■ All the above data simultaneously.
Extended menu
1.
2. "Information"
3. "Reset data"
Sa Su Mo Tu We
1.3