Table of Contents
Advertisement
ANDRE VIGTIGE FUNKTIONER
Transponer på BK-3
14. Other important functions
Denne funktion giver dig mulighed for at transponere BK-3, således at der kan spilles
14. Other important functions
i andre tonearter end der f.eks. læses på noden. Dette er særligt anvendeligt, hvis den
This section presents other important functions you may need regularly.
toneart en sang er skrevet i, skal flyttes til et andet toneleje for at den kan synges, eller
Transposing to a Different Key
This section presents other important functions you may need regularly.
hvis man skal spille sammen med andre musikere.
This function allows you to transpose the BK-3's pitch in semi-tone steps.
Transposing to a Different Key
Depending on the mode setting, this transposition applies to all sections
or just a specific setting. See p. 48.
1. Tryk på [KEY] knappen.
1.
This function allows you to transpose the BK-3's pitch in semi-tone steps.
Press [KEY] button.
Depending on the mode setting, this transposition applies to all sections
or just a specific setting. See p. 48.
1.
Press [KEY] button.
The display changes to:
Displayet skifter til:
The display changes to:
The current "KEY" setting (transposition interval) is displayed and
already selected.
MEMO
The current "KEY" setting (transposition interval) is displayed and
Pressing and holding the [KEY] button locks the "Key" setting.
already selected.
Den valgte transponering vises på linien i displayet.
MEMO
2.
Use the [INC] or [DEC] button to select the desired "Key"
Pressing and holding the [KEY] button locks the "Key" setting.
setting.
2. Brug [DEC] eller [INC] for at vælge den ønskede transponering
2.
"Key" setting
(vises i halvtonetrin: -6~0~+5).
Use the [INC] or [DEC] button to select the desired "Key"
setting.
-6 ~ 0 ~ +5 (semitone units)
"Key" setting
If the "Key" setting differs from "0", the [KEY] indicator lights.
Hvis transponering har anden værdi end "0" vil [KEY] lyse og indikere at instrumentet
After a few seconds, the "KEY" pop-up window disappears. Press the
-6 ~ 0 ~ +5 (semitone units)
[EXIT] button to close it immediately.
transponeret.
If the "Key" setting differs from "0", the [KEY] indicator lights.
NOTE
After a few seconds, the "KEY" pop-up window disappears. Press the
If you choose to transpose the real-time parts, rhythm playback
[EXIT] button to close it immediately.
3. Tryk på [KEY] knappen for af slå transponering fra (lys i [KEY] knap slukker).
MEMO
is also transposed.
NOTE
You can also change the key setting using [MENU] button
"Performance Edit" "Key" (p. 48).
If you choose to transpose the real-time parts, rhythm playback
is also transposed.
MEMO
You can also change the key setting using [MENU] button
"Performance Edit" "Key" (p. 48).
Changing the Octave
This function allows you to transpose the real-time parts (Upper and
Changing the Octave
Lower)1 up or down in octave steps.
1.
Press OCTAVE [-]/[+] button
This function allows you to transpose the real-time parts (Upper and
Lower)1 up or down in octave steps.
1.
Press OCTAVE [-]/[+] button
34
34
38
QUICK GUIDE
The display changes to:
The display changes to:
2.
Use the [UP] or [DOWN] button to select the desired real-
time part Upper (UPP) or Lower (LWR).
3.
2.
Use the OCTAVE[-] or [+] button to select the desired
Use the [UP] or [DOWN] button to select the desired real-
"Octave" setting.
time part Upper (UPP) or Lower (LWR).
3.
Use the OCTAVE[-] or [+] button to select the desired
"Octave" setting
"Octave" setting.
-4 ~ 0 ~ +4 (semitone units)
"Octave" setting
MEMO
-4 ~ 0 ~ +4 (semitone units)
You can also change the octave setting using [MENU] button
"Performance Edit" "Tone Part View" "Octave Shift" (p. 45).
MEMO
Using the 'Melody Intell(igent)'
You can also change the octave setting using [MENU] button
"Performance Edit" "Tone Part View" "Octave Shift" (p. 45).
Function
Using the 'Melody Intell(igent)'
The automatic accompaniment can add a counter-melody to the notes
Function
you play with the Upper part (UPP). Those automatic harmonies are based
on the chords you play in the chord recognition area.
The counter-melody is played by the Melody Intelligent part. There are 18
The automatic accompaniment can add a counter-melody to the notes
harmony types to choose from. See "Melody Intelligent" settings" p. 50
you play with the Upper part (UPP). Those automatic harmonies are based
on the chords you play in the chord recognition area.
1.
Press the [MELODY INTELL] button (so that it lights).
The counter-melody is played by the Melody Intelligent part. There are 18
This adds a harmony to the notes you play.
harmony types to choose from. See "Melody Intelligent" settings" p. 50
1.
Press the [MELODY INTELL] button (so that it lights).
This adds a harmony to the notes you play.
If you want you can change the Melody Intelligent Parameters:
2.
Press [MENU] button "Performance Edit" "Melody
Intelligent"
If you want you can change the Melody Intelligent Parameters:
For more information about Melody Intelligent Parameters see p.
2.
50
Press [MENU] button "Performance Edit" "Melody
Intelligent"
For more information about Melody Intelligent Parameters see p.
50
Advertisement
Table of Contents
