Panel Descriptions - Boss Slicer SL-2 Owner's Manual

Panel Descriptions

Name
1 DC IN jack
2 CHECK indicator
3 OUTPUT A (MONO),
OUTPUT B jacks
4 INPUT A (MONO),
INPUT B jacks
5 CTL/EXP jack
6 Pedal switch
Accepts connection of an AC Adaptor (PSA series; sold separately).
* Use only the specified AC adaptor (PSA series; sold separately), and connect it to an AC outlet
of the correct voltage.
* If the AC adaptor is connected while power is on, the power supply is drawn from the AC
adaptor.
This indicator shows whether the effect is ON/OFF, and doubles as the tempo and battery check
indicator.
The indicator lights up red when the effect is on and lights up green when the effect is off. The
indicator also blinks in time with the tempo.
* The brightness of the CHECK indicator (LED) will dim as the battery lowers. Replace the
battery when the LED is dim or does not light. For details on how to replace, refer to
Changing the Battery(P.13)".
Connect these jacks to your amp or monitor speakers.
Use only the OUTPUT A (MONO) jack if using this unit in mono.
If you're using a stereo setup, use the OUTPUT A (MONO) and OUTPUT B jacks.
When you connect to both the OUTPUT A (MONO) and OUTPUT B jacks, an effect is produced
according to the OUTPUT MODE settings. For details, refer to
Outputting the Effect Sound (OUTPUT
Connect your guitar, bass, or effect unit here.
Use only the INPUT A (MONO) jack if using this unit in mono. Use the INPUT A (MONO) jack and
INPUT B jack when connecting to an effect unit with stereo outputs.
* The INPUT A (MONO) jack doubles as the power switch. The power turns on when you insert
a plug into the INPUT A (MONO) jack.
●
Using the jack as CTL
Connect a footswitch (FS-5U, FS-6, FS-7; sold separately) to control the tap tempo or momentary switch
functions.
For more about footswitch settings, refer to "
FUNCTION)
(P.7)".
●
Using the jack as EXP
Connect an expression pedal (EV-30, Roland EV-5, etc.; sold separately) to continuously change the
effect settings for the expression pedal's pushed-up (horizontal) position and for the pushed-down
(slanted) position.
For more about function settings, refer to "
(EXP FUNCTION)
(P.8)".
●
On/off switch
Function
"2. Selecting Various Ways of
MODE)(P.6)".
3. Assigning Functions to a Footswitch (CTL
4. Controlling the Knobs Using an Expression Pedal
Panel Descriptions
"9.
3