Advertisement
ELECTRICAL & AUDIO CONNECTIONS
Precautions
1. To prevent short circuits, be sure to disconnect the negative battery ground lead
before wiring the system up.
2. When you finish the installation, be sure to make one more check to be sure
everything is done correctly.
3. Reinstate all car parts that were removed.
4. Reconnect the negative battery ground lead.
Primary Wiring Descriptions
ELECTRICAL
12V
GROUND
REMOTE
INPUT
HIGH PASS
OUTPUT
LOW PASS
OUTPUT
PRIME CONNECTION
BATTERY +
GROUND -
REMOTE B+(12V)
RADIO/TAPE
PLAYER TO
CROSSOVER MODULE
CROSSOVER MODULE
TO ANY AMPLIFIER
CROSSOVER MODULE
TO SUB-WOOFER
AMPLIFIER
DESCRIPTION
Connect to the positive battery terminal
(constant + 12V source)
Connect to the vehicle's chassis ground
(check for good ground)
Connect to the remote control wire(or the
electrical antenna) of the car radio/cassette
deck
Connect from pre-amp output of radio/tape
player (or CD) into
Connect from "high-pass output" of
CROSSOVER module to any amplifier input.
Connect from low-pass sub-woofer output of
CROSSOVER to sub-woofer amplifier input.
5
Advertisement
