Table of Contents
Advertisement
Available languages
Available languages
- Each filter is supplied with installation instructions.
Panelwork
Use lukewarm water only, to which a non-aggressive cleaning liquid is added. Do
not use abrasive or aggressive products, or products containing alcohol.
Lighting
- Lighting is provided by two 40 W bulbs.
- To replace them, remove the grease filters
as described in the "Grease filter" section
(fig. 4) to gain access to the bulbs.
- Replace the defective bulb or bulbs with
identical models and replace the grease
filters.
FOR THE INSTALLER
INSTALLATION
- The hood must always be fitted above the center of the cooker hob.
- The minimum distance between the top of the cooker hob and the bottom of the
hood shall be 650 mm.
- If your cooking appliance has a cover, check that it can be lifted without hindrance.
Assembly
- All accessories necessary for installation are supplied with the appliance.
- Use the template to position the support lug wall attachment holes and drill the holes
for the plugs (top edge of the hood aligned with the top of adjacent furniture).
- Attach the support lugs with appropiate screws.
Hood preparation
- Before starting wall mounting, the depth of the hood has to be adjusted to match the
depth of adjacent furniture.
- The hood depth can be adjusted between 27 and 36 cm.
Depth adjustment:
1 - Measure the body depth of the furniture between which the hood is to be installed.
6
4
Advertisement
Table of Contents
