Help Guide
Interchangeable Lens Digital Camera
ILME-FX30
Attaching the supplied XLR handle unit (only with ILME-FX30)
By attaching the XLR handle unit, you can use the functions of the XLR adaptor.
Remove the shoe cap, and then attach the XLR handle unit to the Multi Interface Shoe.
1
Tightly fix the screws on either side by using a coin, etc.
2
Note
Turn off the camera before attaching/removing the handle.
When attaching the handle to the camera, fasten the two handle-attachment screws securely. Using the handle without fastening
the handle-attachment screws may damage the Multi Interface Shoe terminal or cause the camera to fall off.
85