Specifications; Limited Warranty - Russound AB-4 Instruction Manual

Amplified automatic a / b selector
Table of Contents

Advertisement

6. Specifications

Minimum trigger sensitivity 15mV.
Delay 0 to 30 seconds.
Line Audio Inputs:
Input Impedance 10kΩ.
Audio Power Output (Speaker output):
62 WRMS /ch, @ 4 ohms (20Hz to 20KHz) with no more than .06% THD.
56 WRMS /ch, @ 8 ohms (20Hz to 20KHz) with no more than .06% THD.
Power Requirements (USA & Canada Only):
AC 120 Volts 60Hz 2 AMPS.
Dimensions: 11 3/4" W x 10" D x 3 5/16" H.
Weight: 7 lb.

7. LIMITED WARRANTY

The Russound AB-4 is fully guaranteed for two (2) years from the date of purchase against all defects in materials
and workmanship. During this period, Russound will replace any defective parts and correct any defect in work-
manship without charge for either parts or labor. For this warranty to apply, the unit must be installed and used
according to it's written instructions. If service is necessary, it must be performed by Russound. The unit must be
returned to Russound at the owner's expense and with prior written permission. Accidental damage and shipping
damage are not considered defects under the terms of the warranty. Russound assumes no responsibility for
defects resulting from abuse or servicing performed by an agency or person not specifically authorized in writing
by Russound. Damage to or destruction of components due to improper use voids the warranty. In these cases,
the repair will be made at the owner's expense. To return for repairs, the unit must be shipped to Rus-sound at the
owner's expense, along with a note explaining the nature of the service required. Be sure to pack in a corrugated
container with at least 3 inches of resilient material to protect the unit from damage in transit.
6
Maximum input level 10 volts.

Advertisement

Table of Contents
loading

Table of Contents