Mobile Device Wireless And Network Settings - LXE HX3 Reference Manual

Wavelink Avalanche Enabler Configuration

Mobile Device Wireless and Network Settings

Once the connection to the Mobile Device Server is established, the Enabler will attempt to apply
all network and wireless settings contained in the active profile. The success of the application of
settings is dependent upon the local configuration of control parameters for the Enabler. These
local parameters cannot be overridden from the Avalanche Mobility Center Console.
The default Enabler adapter control setting are:
To configure the Avalanche Enabler management of the network and wireless settings:
1. Open the Enabler Settings Panels by tapping the Avalanche icon on the desktop.
2. Select File | Settings. Enter the password.
3. Select the Adapters tab.
4. Choose settings for the Use Manual Settings parameter.
5. Choose settings for Manage Network Settings, Manage Wireless Settings and Use
Avalanche Network Profile.
6. Tap the OK button to save the changes.
7. Reboot the device.
Related Manual: Using Wavelink Avalanche on LXE Windows Computers.
E-EQ-HX3RG-C
•
Manage network settings – enabled
•
Manage wireless settings – disabled for Windows CE Units
•
Use Avalanche network profile – enabled
123
HX3 Reference Guide