Table of Contents
Advertisement
Menu option descriptions
Auto keypad lock
Automatically locks the remote buttons when the buttons are not used for
Press
then
to unlock the keypad.
Note: If the auto keypad lock feature is programmed On, the remote un-
locks when the vehicle ignition is turned Off. The remote stays unlocked to
remote. When the
button is pressed, the keypad auto lock feature
resumes normally.
Page On or Off and Power save
seconds, and reports any factory alarm triggers (if the system is within the
operating range and the factory alarm option is installed).
not check the status of the
system. In the paging Off mode the remote beeps when a button on the
remote is pressed.
are pushed for 72 hours. The timer resets each time a button is pressed.
Receive command confirmations on the remote with vibrations, beeps or
both, or with display only.
Remote start display: Clock, temperature and runtime
sequence. Clock displays the current time during remote start.
Temperature displays the current cabin temperature during the remote start.
Runtime displays the runtime remaining during the remote start.
32
© 2008 Directed Electronics. All rights reserved.
Advertisement
Table of Contents
