How To Use Other Wireless Lan Features - Hitachi R-ZXC740RH Instruction Manual

If the pairing setup fails
● Make sure that the wireless LAN password, which was entered in
● Make sure that the smartphone and its OS is targeted model
● Make sure that the wireless LAN router ' s communication standard corresponds to IEEE.802.11b/g/n (2.4 GHz only).
It does not correspond 5 GHz.
●
3 Check whether the smartphone is connected to the 5 GHz SSID or wireless LAN router.
● Set the unit, smartphone, and wireless LAN router close to each other.
● Only one pairing can be set at one time. Set them one by one.
● 5 smartphones can be registered per 1 unit. 6 or more smartphones cannot be registered.
● The following devices may be affected by radio waves, and this product may not be able to communicate with the smartphone temporarily.
・Microwave oven during heating ・Other wireless LAN devices ・Bluetooth device etc.

HOW TO USE OTHER WIRELESS LAN FEATURES

Set wireless LAN feature to " None "
1
Touch button on the Control Panel to turn on the indicator lamp.
All indicator lamps turn on, and then the current settings are displayed.
2
Touch and hold
to turn off
・If the wireless LAN feature is set at " No " , functions that can be operated with a smartphone cannot be used.
・The registered information of the paired smartphone is not deleted.
・When using the wireless LAN function again, it is not necessary to rep-do the pairing settings.
Delete all registration information (initialization)
● Delete all information registered by the wireless LAN function (initialization). Please carry out when discarding or transferring the unit.
1
Touch button on the Control Panel to turn on the indicator lamp.
All indicator lamps turn on, and then the current settings are displayed.
2
Touch and hold
light .
※ If
is already lit, proceed to
● The displaywill turn off in about 40 seconds for energy savings, but the setting will continue untilreleased.
Notice
3
Open the Lower Freezer.
4
Touch button on the Control Panel to turn on the indicator lamp.
All indicator lamps turn on, and then the current settings are displayed.
5
Touch and hold
(beep) sounds.
6
Close the Lower Freezer.
4
for at least 3 seconds until the setting sound (2 beeps) sounds
.
for at least 3 seconds until the setting sound (beep) sounds to
3 .
for at least 3 seconds until the setting sound
, is correct
Operate the unit
Pg.17
Operate the unit
Touch for
3 seconds
15