Safety - ABB Sace Emax 2 Installation, Operation And Maintenance Instructions For The Installer And The User

2 - Safety

Warnings
5 | © 2022 ABB | 1SDH000999R0002 - ECN000232533
Figure 2
The following warnings must be respected:
• READ THE INSTRUCTIONS CAREFULLY BEFORE TRYING TO INSTALL, OPERATE OR REPAIR THE
CIRCUIT BREAKER.
• Store these instructions along with other documents for instruction, maintenance and installation,
drawings and descriptive notes on the circuit-breaker.
• Keep these documents available during the installation, operation and maintenance of the appliance.
The use of these instructions facilitates proper maintenance.
• Install the circuit-breaker within the limits of the project described in the instruction manual
shipped with the unit. These circuit-breakers are designed to operate with values of voltage and
current within the limits of plate ratings. Do not install this equipment in systems operating at
nominal values exceeding these limits.
• Follow the safety procedures indicated by Your Company.
• Do not open any covers or doors, do not work on devices before removing power from all circuits,
and after making sure of that with a measuring instrument.
WARNING!
•
maintenance and principles for safe operation are not included. It is important to note that this
document contains safety and precaution instructions, against certain methods (of installation,
use and maintenance) that could cause harm to personnel, damage devices, or make them unsafe.
• these warnings and alarms do not include all conceivable ways to make installation, use and
maintenance recommended by ABB or not, that may be made, or possible consequences and
complications of each conceivable way, nor shall ABB investigate all those ways.
• anyone using maintenance procedures or devices, recommended by ABB or not, must check
thoroughly that neither personal safety nor the safety devices are endangered by mode of installation,
use, maintenance or the instruments used. For more information, questions or specific problems
contact your nearest ABB representative.
• This manual is written for qualified personnel only and is not intended as a substitute for a proper
course, or experience about safety procedures for this device.
• for the products equipped with communication, the purchaser, the installer or the final customer
is responsible for applying all the IT safety measures necessary in order to prevent risks deriving
from connection to communication networks; such risks include, among other things, the use of the
product by unauthorized persons, alteration of its normal functionality, accessing and modifying
the information.
• the purchaser, installer or end user is responsible for ensuring that notices and safety signs are
posted and that all access points and switching devices are locked securely when the switchgear
is left unattended, even momentarily.
• all the information contained in this document reflects the latest product information available
at the time of printing. We reserve the right to edit the document at any time and without notice
HAZARD
ACCIDENTAL CONTACT WITH LIVE POINTS
CAN CAUSE SHOCK, BURNS AND RESULT
IN DEATH.
Do not try to use the product in any way, before having
read this instruction manual
detailed descriptions of standard procedures for installation, use,
ABB | SACE Emax 2
Introduction | 2 - Safety