Page 1
To deodorize your new chair For longer use leave the chair in a well Re-tighten bolts every 6 months by using ventilated area for 1-2 days the enclosed allen-key. *Using an electric drill can damage the chair. ASSEMBLY Please re-tighten bolts manually. INSTRUCTION Contents Instructions...
Page 2
Instructions TIPS! ※NOTICE Please use the allen key included GAS LIFT instead of an electric drill. Use the box for CYLINDER X1 an easier assembly. STEP 1 Bottom BASE LEG X1 MAKE SURE TO Insert gas lift cylinder into the center of the base. REMOVE THE GAS LIFT CAP STEP 2 For proper alignment:...
Page 3
User Manual For proper alignment: Check Slightly under-tighten the bolts. fully tighten x 10 Tension Right hand Adjustment Tilt Tilt Lock Put the armrest on the bottom of the seat Once all of the armrests bolts are in place, fully tighten and tighten with three bolts on each side.