Samsung HG43AU800N Install Manual page 30

Hotel Option menu Item
Self Diagnosis
for TV
System Manager
System
OTN Update
SW Update
About This TV
Standby LED
TV Reset
Enrollment
LYNK
Cloud
Enrollment Status
Virtual Standby Mode
*Virtual
Standby
Reboot Time
Room Number
H.Browser Mode
H.Browser Vendor
H.Browser
Solution
URL Launcher Setting
• *: This function is available when Enrollment Status in LYNK Cloud is set to ON.
• Refer to the manual of each solution for details about functions and settings of the solutions such as LYNK Cloud.
Description
Run the Device Care menu.
• Start Picture Test: Use this test when you experience a problem with your TV's
picture.
• Start Sound Test: Use this test when you experience a problem with your TV's
sound.
• Signal Information: Show digital broadcasting signal information.
• Reset Smart Hub: Reset the Smart Hub and Samsung account settings stored on
your TV.
• Reset: Restore all TV settings, excluding network settings, to the factory defaults.
(Not available)
Gives you direct, immediate access to System Manager functions such as Time,
Language, Change PIN.
System Manager allow you to adjust your TV's system and customize settings for your
viewing environment.
Lets you upgrade the TV Software over the network when a valid upgrade file is
present on server.
• OTN Update changed to ON and disabled when Enrollment Status in LYNK Cloud
is Yes.
Lets you upgrade the TV Software with a USB device.
Display the Samsung web site, and product and software information.
When the TV is in standby mode, you can configure the settings of the power
indicator.
• ON: The LED is on.
• OFF: The LED is off.
Returns all settings on the TV to their factory defaults.
Lets you enroll the TV with LYNK Cloud solution.
Check the status of the TV enrollment in the LYNK Cloud service.
When the AC power cord is plugged in and the power is off, this option maintains the
TV's important features even after the screen is off.
• Electricity consumption may vary depending on the environment.
After the TV power is off (in Virtual Standby Mode) if there is no input from the user
within the set Reboot Time, the TV will reboot and enter Virtual Standby Mode again.
You can set the room number of the TV's location.
You can turn on or off the H.Browser Mode and run the H.Browser Web App.
You can select the H.Browser Vendor.
H.Browser Solution settings menu
• Install Web App: Enter the H.Browser server URL where Web App and sssp_config.
xml files are located.
• Uninstall: You can delete the installed Web App.
• Timeout setting: Set the timeout period for connecting to the URL.
• Developer Mode: If you used Tizen Studio (SDK) for development, you can connect
to the Host PC (which SDK is installed) to use the development tool.
English - 30