Clifford Cyber 5 Owner's Manual page 7

Standard Features of the Cyber 5 (cont.)
— When you return to your
Patented Smart Prior Intrusion Attempt Alert
vehicle and remotely disarm your Cyber 5, a special chirp and parking
light flash sequence will audibly and visually alert you from a distance if
an intrusion attempt was foiled while you were away. Your Cyber 5 will
even identify the specific trigger or sensor that detected the intrusion
attempt.
— Just a few flicks of a switch
Patented Remote Control Code Learning
lets you match to the system up to 4 different 12-channel Clifford ACG
remote controls. Just as easily, a lost or stolen remote control can be
deleted from the system memory.
— For remote controlled system operation
Control Unit with 6 Channels
and accessories.
—Very large scale integration (VLSI)
Advanced CMOS Microcomputer
microprocessor commands and monitors all system functions more than
1,000,000 times per second, yet it draws less power than the vehicle's
clock, so it won't deplete your car battery like other alarms.
— You may choose either a fault-proof
Selectable Starter/Ignition Interrupt
mode, which lets you start the engine even in the unlikely event of a
system malfunction, or ultra-secure mode that ensures a thief won't be
able to start the vehicle even if he finds the system control unit and
disconnects it!
— For full perimeter protection of the engine
Hood/Trunk Trigger Input
compartment and trunk contents (may require optional pin switches).
— Adds visual deterrence and
High-Luminescence LED Status Indicator
identifies system status.
— When power to the system is
Patented SmartPowerUp™ II
disconnected, the system's non-volatile memory always remembers the
last state (armed, disarmed or valet mode) and returns to that state when
power is restored. So if a thief disconnects the power and then restores it
in an attempt to start the car, the system will re-arm and instantly sound
the siren while immobilizing the vehicle.
6