Table of Contents
Advertisement
5.2.1.4 Audio
Audio Menu
Enable:
Set up the audio switch for the video camera.
Output Volume:
Input Volume:
Type:
Set the audio decoding type of the camera.
5.2.2 Video recording
This menu enables you to configure the recording parameters
5.2.2.1 Video recording Settings
Record Switch (Recording Switch):
Stream Mode (code stream mode):
the primary and child code stream are recorded; if the primary code stream is selected, only the main code
stream video is recorded.
PreRecord (Pre-video):
event occurs.This option is recommended if your primary video type is based on mobile detection or I / O
alerts.
tab: Set up the audio of the camera (with device support).
Set the output volume of the camera.
Set the input volume of the video camera.
Select to enable recording in this channel.
Select the recording quality. If you select a dual code stream, both
If this option is enabled, the DVR starts recording a few seconds before an alert
48
DVR USER MANUAL
Advertisement
Table of Contents
