Page 1
Jenn-Air is a Trademark of the Maytag Corporation and is used under license to Lowe’s Companies, Incorporated. Item No. 058650 (Fits Jenn-Air 3 burner barbeque grills) ROTISSERIE KIT CONTENTS PARTS Description Quantity Motor Motor Bracket 2.75-in. Bracket Bolts The electric motor involved in...
ROTISSERIE OPERATING INSTRUCTIONS IMPORTANT: YOUR GRILL MAY BE EQUIPPED WITH ROTISSERIE BURNERS. THE INSTRUCTIONS BELOW INCLUDE OPERATION FOR GRILLS EQUIPPED WITH ROTISSERIE BURNERS AND INSTRUCTIONS FOR GRILLS NOT EQUIPPED WITH ROTISSERIE BURNERS. BE SURE TO FOLLOW THE INSTRUCTIONS APPROPRIATE FOR YOUR GRILL. IMPORTANT SAFETY INSTRUCTIONS CAUTION - TO PROTECT AGAINST SHOCK HAZARD CONNECT ONLY TO PROPERLY GROUNDED OUTLET.
ROTISSERIE ASSEMBLY Estimated Assembly Time: Approximately 10 minutes Required Tools: Phillips Screwdriver (not included) 1. Align the holes in the motor bracket (B) to the pre-drilled holes on the left side of the grill. Attach the motor bracket using two 2.75-in. bolts (C) provided as shown in Fig.
OPERATING INSTRUCTIONS GENERAL USE OF THE ROTISSERIE (ALSO SEE GRILL INSTRUCTION MANUAL) After installing rotisserie rod handle, slide one of the meat forks onto the rod (prongs toward the food.) Center the product to be cooked on the rod, then push the meat forks firmly together. Tighten the wing nuts.
TROUBLESHOOTING PROBLEMS WHAT TO DO Parts are missing or the motor Call customer service at 1-800-554-5799 won’t work. The spit rod flexes when it’s turning. It is normal for the spit rod to flex when larger cuts of meat are being cooked. The rod is not rotating at a constant Reposition the meat on the rod to adjust the speed.