Connections; Connecting To A Tv - LG LH-D6530A Owner's Manual

Connections

Connecting to a TV

Make one of the following connections, depending on
the capabilities of your existing equipment.
ips
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the DVD/CD receiver. Use one of the connections
described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
– Make sure the DVD/CD receiver is connected directly
to the TV. Select the correct AV input on your TV.
– Do not connect your DVD/CD receiver to TV via your
VCR. The DVD image could be distorted by the copy
protection system.
Video connection
Connect the MONITOR OUT jack on the DVD
1 1
Receiver to the video in jack on the TV using the
video cable supplied (V).
Connect the Left and Right AUDIO OUT jacks of
2 2
the DVD/CD Receiver to the audio left/right in jacks
on the TV (A) using the audio cables.
S-Video connection
Connect the S-VIDEO OUT jack on the DVD/CD
1 1
receiver to the S-Video in jack on the TV using the
S-Video cable (S).
Connect the Left and Right AUDIO OUT jacks of
2 2
the DVD/CD receiver to the audio left/right in jacks
on the TV (A) using the audio cables.
Component Video (Color Stream
Connect the COMPONENT VIDEO OUT/
1 1
PROGRESSIVE SCAN jacks on the DVD Player to
the corresponding in jacks on the TV using an Y Pb
Pr cable (C).
Connect the Left and Right AUDIO OUT jacks of
2 2
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.
10
Progressive Scan (ColorStream
If your television is a high-definition or "digital ready"
television, you may take advantage of the DVD
Player's progressive scan output for the highest
video resolution possible.
If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
Connect the COMPONENT VIDEO OUT/
1 1
PROGRESSIVE SCAN jacks on the DVD Player to
the corresponding in jacks on the TV using an
optional Y Pb Pr cable (C).
Connect the Left and Right AUDIO OUT jacks of
2 2
the DVD Player to the audio left/right in jacks on the
TV (A) using the supplied audio cables.
ote
– Set the Progressive to "On" on the setup menu for
progressive signal, see page 18.
Rear of TV
S
® ) connection
VIDEO
S-VIDEO COMPONENT VIDEO /
INPUT
PROGRESSIVE SCAN INPUT
INPUT
Y Pb
L
V
C
SUBWOOFER COMPONENT
LINE OUT VIDEO OUT
Y
M
O
N O
I U
T T
O
Pb
R
S
/
V O
I U
D T
E
Pr
O
Rear of DVD/CD receiver
® pro) connection
AUDIO INPUT
Pr
R
L
A