Electrical Specifications - Dell D7523QT User Manual

Electrical specifications

Model
Video input signals
AC input voltage/
frequency/current
Inrush current
Power Consumption
As defined in EU 2019/2021 and EU 2019/2013(AC Power Off).
1
Maximum brightness and contrast setting.
2
Pon: Power consumption of On Mode measured with reference to Energy Star
3
test method.
TEC: Total energy consumption in kWh measured with reference to Energy Star
test method.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components, and
devices you ordered and shall have no obligation to update such information.
The customer should not rely upon this information in making decisions about
electrical tolerances or otherwise. No warranty as to accuracy or completeness is
expressed or implied.
D7523QT
• HDMI 2.0, 600 mV for each differential line, 100
ohm input impedance per differential pair
• DisplayPort 1.2, 600 mV for each differential line,
100 ohm input impedance per differential pair
100 VAC to 240 VAC/50 Hz or 60 Hz ± 3 Hz/3.5 A
(typical)
120 V: 30 A (maximum) at 0 °C (cold start)
240 V: 60 A (maximum) at 0 °C (cold start)
0 W (Off mode)
1
0.3 W (Standby Mode)
147.5 W (On Mode)
245 W (Maximum)
166.5 W (Pon)
3
512.2 kWh (TEC)
3
1
1
2
About your monitor 15
|