Siemens ecofast 3RK1702-2GB18-0AA1 Manual page 76

Safety guidelines
This manual contains notices which you should observe to ensure your own personal safety, as well as to pro-
tect the product and connected equipment. These notices are highlighted in the manual by a warning triangle
and are marked as follows according to the level of danger:
Safety note
Contains important information for the acceptance test and the safety-related use of the product.
Danger
indicates that death, severe personal injury or substantial property damage will result if proper precautions
are not taken.
Warning
indicates that death, severe personal injury or substantial property damage can result if proper precautions are
not taken.
Caution
indicates that minor personal injury or property damage can result if proper precautions are not taken.
Caution
indicates that property damage can result if proper precautions are not taken.
Attention
draws your attention to particularly important information on the product, handling the product, or to a particu-
lar part of the documentation.
Qualified personnel
Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are defi-
ned as persons who are authorized to commission, to ground, and to tag circuits, equipment, and systems in
accordance with established safety practices and standards.
Correct usage
Note the following:
Warning
This device and its components may only be used for the applications described in the catalogue or the techni-
cal descriptions, and only in connection with devices or components from other manufacturers which have
been approved or recommended by Siemens.
This product can only function correctly and safely if it is transported, stored, set up, and installed correctly,
and operated and maintained as recommended.
Brands
®
SIMATIC , SIMATIC HMI
®
Han-Brid , Han Q4/2
Some other designations used in these documents are also brands; the owner's rights may be violated if they
are used by third parties for their own purposes.
Copyright Siemens AG 2004All rights reserved
The reproduction, transmission or use of this document or its con-
tents is not permitted without express written authority. Offenders
will be liable for damages. All rights, including rights created by
patent grant or registration of a utility model or design, are reserved.
Technical Assistance: Telephone:+49 (0) (0) 911-895-5900 (8°° - 17°° CET)
Technical Support:
Siemens AG
Bereich Automatisierungs- und Antriebstechnik
Geschäftsgebiet Niederspannungs-Schalttechnik
D-90327 Nürnberg
Siemens Aktiengesellschaft
® ®
, ECOFAST and SIMATIC NET
® ®
, Han 10E are brands of Harting company
E-mail: technical-assistance@siemens.com
Internet: www.siemens.com/lowvoltage/technical-assistance
Telephone: +49 (0) 180 50 50 222
®
are brands of SIEMENS AG.
Disclaimer of liability
We have checked this manual to ensure that its contents are correct
and applicable in relation to the hardware and software it describes.
Despite all our endeavors, however, discrepancies cannot be wholly
excluded and so we cannot guarantee complete correctness and
applicability. However, the data in this manual are reviewed regularly
and any necessary corrections included in subsequent editions. Sug-
gestions for improvement are welcomed.
©
Siemens AG 2004
Technical data subject to change without notice.
Fax: +49 (0) 911-895-5907