Konica Minolta HD-505 Installation Manual

I. Accessory parts
No. Name
1. Hard disk
2. Shoulder screw
3. Damper
4. Hard disk sup-
port material
5. Cushion
6. Flat cable
7. Installation
Manual
II.Caution for handling
1. Precautions against static electricity.
• Keep the hard disk in an antistatic bag while
transporting it or storing it.
• When working in places where static electricity
tends to accumulate, such as on a carpet, dis-
charge electricity from your body by touching-
any metallic portion before handling the hard
disk.
2. Do not touch the contacts on the hard disk with
your hands, as that may result inpoor conductivity.
3. Do not physically damage the hard disk by drop-
ping it, bending it, etc.
4. When handling the hard disk, hold the circuit
board by both sides so that no pressure is applied
to the circuit board face or the top cover.
HD-505
INSTALLATION MANUAL
Shape Q'ty
1
16GAIXC001SA
8
16GAIXC002SA
8
16GAIXC003SA
2
16GAIXC004SA
1
16GAIXC005SA
1
16GAIXC006SA
1
Hard disk
III. Installation procedures
1. Turn off the machine's sub and main power switches,
and unplug the power cord from the outlet.
2. Remove the back cover(6 screws).
Back cover
3. Remove the board cover (4 screws).
Board cover
4. Install the hard disk unit.
(1) Set the dampers onto the board cover and
hard disk support material.
Damper
Damper
Board cover
E-1
Applied Machines: 500/420
MFP 50ppm/42ppm
16KAIXE001SA
16KAIXE002SA
Hard disk
support material
Damper
16GAIXE007SA
16GA97010