iLIVE IAEB25 - Wireless Stereo Headset Manual

Features

• Supports Bluetooth
• Supports profile A2DP (Advanced Audio Distribution Profile)
• Digital volume control
• Built-in microphone
• Micro-USB port for battery recharge
• Wireless range: 33 feet
• DC battery power: built-in rechargeable lithium ion battery
• Battery life: approx. 4 hrs at 100% volume, 6 hrs at 50%

Includes

• 3 pairs of eartips: 1 small, 1 medium, 1 large
• Micro-USB to USB cable
• Hard carrying case

Overview & Controls

1. Power Switch (side)
2. Micro-USB Power Port
3. Volume +/−
4. Play/Pause/Speakerphone/Pair
   Press and hold to pair
   Press to play or pause the current track.
   Press to answer an incoming call.
5. Mic (side)

Battery Power

1. Using a Micro-USB to USB cable (included), connect to the USB port of a powered on computer or USB power adaptor to charge the unit. Charge fully before use.

Initial charge time is approximately 2 hours. The LED indicator will display a red light when charging, and turn blue when fully charged.

LED Indicators

Note: The Play/Pause/Speakerphone/Pair button doubles as the LED Indicator.

Status	Indicators
Power On	Flashing blue light
Low Battery	Flashing red light
Charging	Red light
Finished Charging	Light OFF
Pairing Wireless	Flashing red and blue lights

Pairing a Bluetooth Device

1. Power on the unit by sliding the Power Switch to the ON position, and press and hold the Play/Pause/Speakerphone/Pair button for approximately 7 seconds. When pairing, remain within 3 feet of the unit.
2. Using the controls on your Bluetooth device, select IAEB25 in your Bluetooth settings to pair. If your device requests a password, enter the default password 0 0 0 0.
3. Refer to the user's manual for your specific device for instructions on pairing and connecting Bluetooth devices. After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device.

If your device should become unpaired or you find it is unable to connect, repeat the above steps.

Playing Audio Wirelessly

1. Use the controls on the connected Bluetooth Device to select a track.
2. To play or pause the selected track, use the controls on the connected Bluetooth Device or press the Play/Pause/Speakerphone/Pair button.
3. Audio played through the connected Bluetooth device will now be heard through the speakers.

Using the Speakerphone

1. To accept a call, press the Play/Pause/Speakerphone/Pair button, or use the controls on the connected phone.
2. To end a call, press the Play/Pause/Speakerphone/Pair button, or use the controls on the connected phone.
3. To re-dial the last dialed number, press the Play/Pause/Speakerphone/Pair button twice.

FCC WARNINGS

• 
  Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ADDITIONAL WARNINGS

• 
  To prevent fire or shock hazards, do not expose this unit to rain or moisture.
• 
  Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
• 
  This product may contain chemicals known to the State of California to cause birth defects, or other reproductive harm (California Prop 65). Wash hands after handling.
• This product meets and complies with all Federal regulations.
• To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level.

Contact Information

Website: www.iLiveElectronics.com

Email Support: prodinfo@dpiinc.com

Email Parts: partsinfo@dpiinc.com

Phone Support: 1-888-999-4215

Warranty

For Warranty Information and the most up-to-date version of this User's Guide, go to: www.iLiveElectronics.com.

Specifications are subject to change without notice.

Copyright © 2016 Digital Products International (DPI, Inc.)
All other trademarks appearing herein are the property of their respective owners.