Appendix K: Photographs Of Eut Configuration Test Set Up - AOpen CD-952E/TKU Manual

Declaration of Conformity
-25-

4.11 Appendix K: Photographs of EUT Configuration Test Set Up

According to ANSI C63.4-1992 and/or ET Docket 95-19, or EN55022:1994/ A1:1995/
A2:1997 / CISPR 22:1993/ A1:1995/ A2:1997:
The measurement results along with the appropriate limits for comparison shall be presented in tabular
form. If an alternate test method is used, the test report must identify that method and justification for
its use shall be provided. Instrumentation, instrument attenuator and bandwidth settings, detector
function, EUT arrangements, a sample calculation with all conversion factors and all other pertinent
details shall be included along with the measurement results. When automatic scan techniques are
used, an explanation of how each emission from the EUT was maximized shall be included in the test
report along with the scan rate used to obtain each level.
The justification for selecting a particular EUT configuration and particular length of interface cable to
produce maximized emissions must be documented in the test report. Photographs clearly showing the
test set-up and interface cable arrangement for the highest radiated and line conducted emission
measured shall be included.
The Front View of Highest Conducted Set-up For EUT
International Standards Laboratory Report Number: ISL-99135FB
(NVLAP Lab. Code: 200234-0)