Rules For Safe Operation - MULTIQUIP Stow Cutter 3 CC813H20 Operation And Parts Manual

RULES FOR SAFE OPERATION

CAUTI CAUTI CAUTION CAUTI CAUTI
Failure to follow instructions in this manual may lead to
serious injury or even death! This equipment is to be
operated by trained and qualified personnel only! This
equipment is for industrial use only.
The following safety guidelines should always be used when
operating the Stow Cutter 3 Saw.
SAFETY
DO NOT operate or service this
equipment before reading this entire
manual.
This equipment should not be operated by persons under
18 years of age.
NEVER operate the saw without proper
protective clothing, shatterproof glasses, steel-
toed boots and other protective devices
required by the job.
NEVER operate this equipment when not
feeling well due to fatigue, illness or taking
medicine.
NEVER operate the saw under the
influence or drugs or alcohol.
NEVER use accessories or attachments, which are not
recommended by or Multiquip for this equipment. Damage
to the equipment and/or injury to user may result.
Manufacturer does not assume responsibility for any
accident due to equipment modifications. Unauthorized
equipment modification will void all warranties.
Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.
ALWAYS check the saw for loosened hardware such as
nuts and bolts before starting.
PAGE 10 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV. #8 (09/22/06)
STOW CUTTER 3 SAW — RULES FOR SAFE OPERATION
NEVER touch the hot exhaust
manifold, muffler or cylinder. Allow
these parts to cool before
servicing the saw.
High Temperatures – Allow the engine to cool before
adding fuel or performing service and maintenance
functions. Contact with hot! components can cause serious
burns.
The engine of this saw requires an adequate free flow of
cooling air. NEVER operate the saw in any enclosed or
ALWAYS refuel in a well-ventilated area, away from sparks
and open flames.
ALWAYS use extreme caution when
working with flammable liquids.
When refueling, STOP the engine and
allow it to cool.
NEVER smoke around or near the
machine. Fire or explosion could result
from fuel vapors , or if fuel is spilled on
a hot! engine.
NEVER operate the saw in an explosive atmosphere
where fumes are present or near combustible materials.
An explosion or fire could result causing severe bodily
harm or even death.
Topping-off to filler port is dangerous, as it tends to spill
fuel.
NEVER use fuel as a cleaning agent.
narrow area where free flow
of the air is restricted. If the
air flow is restricted it will
cause serious damage to the
saw's engine and may cause
injury to people. Remember
the saw's engine gives off
DEADLY carbon monoxide
gas.