Palram PROLEAFY Installation And Operation Manual page 18

6.5 FILLING RESERVOIR WITH WATER
Perform the following steps to
treat the water and fill the reservoir:
18. Getting Started | Filling Reservoir with water
Verify the pump
1
is switched off
Fill a bucket with
2
water treated by
reverse osmosis
Add pHDown
3
and stir until
the pH meter
displays 6.5-7
Pour the water
4
into the reservoir,
repeating steps 2
and 3 until MAX
level is reached
HOME SAFETY INTRODUCTION
www
GETTING PLANTING AND
STARTED GROWING
NOTE:
The water reservoir can hold
20 liters of water
TIP:
Water treated by reverse osmosis
removes many of the minerals that impair
plant growth. Using untreated water may
require additional analysis to achieve the ideal
growing conditions, depending on water source
CAUTION:
Exceeding MAX on the water
gauge will cause the water to overflow and spill
onto the floor
CAUTION:
Follow manufacturers'
instructions prior to using pHDown,fertilizer,
and the pH and EC meters
Indoor Hydroponic Grow Cabinet | Installation and operation Guide Rev A | Doc P/N: 460966-8080
TROUBLE-
SHOOTING