Download Print this page

Paradigm Decor 2S Instructions Manual

Vertical 55” to 88” tv mounting bracket
Hide thumbs Also See for Decor 2S:

Advertisement

Quick Links

Wall mount your speakers securely
enough that they cannot fall and cause
personal injury or damage to property.
Paradigm DOES NOT supply hardware for
mounting speakers to the wall. Always use
screws appropriate for wall type and weight
of speakers
.
An Important Note About TV Mounting Bracket:
Ensure the TV mounting bracket, attached to the wall, will accommodate
the extra weight of the Décor speakers and Décor Mounting Rails BEFORE
attaching to wall. If unsure, consult dealer or TV mount manufacturer.
CAUTION: 2 PERSON
INSTALLATION
Instructions for VERTICAL
55" to 88" TV Mounting Bracket
NON LIABILITY: We are aware that the mounting
assemblies provided for speakers in this manual could be
used for purposes and in ways other than those for which
they were intended. The manufacturer, distributor, retailer
and their respective agents cannot be held responsible
or liable for injuries or property damage—direct, indirect
or consequential—arising from the use of or inability to
use these products safely and properly. Every effort has
been made to provide accurate, error-free installation
instructions. Paradigm Electronics Inc. disclaims liability
for difficulties that may arise from the misinterpretation
of information contained in these instructions.
2S
2SC

Advertisement

loading

Summary of Contents for Paradigm Decor 2S

  • Page 1 Paradigm DOES NOT supply hardware for use these products safely and properly. Every effort has mounting speakers to the wall. Always use...
  • Page 2: Hardware Included

    HARDWARE INCLUDED (KIT0081 or KIT0082) Depending on TV type, not all hardware listed will be required. (8) SMALL (8) LARGE (8) SPACERS SPLIT WASHERS M6 WASHERS (8) SPLIT (8) LARGE WASHERS (6) M6-NUTS M8 WASHERS (6) M8-NUTS (8) #6-32 x 5/8” (8) #12-24 x 1-3/4”...
  • Page 3 CAUTION: THIS IS A TWO PERSON PROCEDURE. TWO PEOPLE ARE NEEDED TO CARRY OUT THE INSTRUCTIONS OUTLINED BELOW. BE CAREFUL NOT TO DAMAGE TV AND SPEAKER DRIVERS DURING BRACKET INSTALLATION. Before installing, identify TV profile type (A, B or C) and gather the necessary mounting hardware required from the contents provided.
  • Page 4: Mounting Procedure

    MOUNTING PROCEDURE Vertical speaker mounting rails, with hinges, have been preassembled. Image below shows preassembled parts and hardware, in exploded view. Lay TV facedown, on floor. Position Décor SPEAKER AND GRILLE along side edges of TV. Be careful not to damage the screen or the speaker drivers. Be sure to position speaker with terminals away from TV.
  • Page 5 2. Place speaker rail assemblies on back of TV and align holes on rails to holes on back of the TV. Ensure center of Décor Fixed Mounting Rail is centered to width of TV. 3. If TV is (A) CURVED or SLIM or PROFILE, eight spacers (E) are provided to make TV “flush”...
  • Page 6 (B) PROFILE TV (4 screw holes at base of TV) (C) PROFILE TV (2 screw holes TOP and BOTTOM) WASHER ON PART “U” OR “V” TO BE SET ON SAME LEVEL WITH TV REAR PROTRUSION...
  • Page 7: Fine Adjustments

    5. Secure Décor Speaker rails and TV mounts, as shown on previous pages, using washers and screws. DO NOT TIGHTEN SCREWS AT THIS STAGE. 6. Attach speaker brackets (Z) to speaker using washers (A) and screws (I). Channel in speaker back used to drive bracket screws 7.
  • Page 8 To ensure proper installation and enjoy all of the exceptional sound these speakers are designed to provide, please read this manual and follow all instructions. Paradigm Electronics Inc., 205 Annagem Blvd., Mississauga, ON L5T 2V1 T: +1 905.564.1994 MAN0165 REV2...

This manual is also suitable for:

Decor 2sc