No.
Component
3
Dummy SD
card
4
Microphone
5
Stylus holder
Bottom view
No.
Component
1
Soft reset
switch
2
Proprietary
26-pin
connector
3
Hard reset
switch
Description
Use this to protect the SD connector when
no card is installed.
Inputs audio into your handheld.
Secures the stylus to your handheld. To use
the stylus, remove from its holder and hold
it as you would hold a pen or pencil.
Description
Allows your handheld to get a fresh start,
similar to rebooting a computer. All records
and entries are retained after a soft reset.
Connects your handheld to a portable or
desktop computer and DC power supply to
an AC wall outlet to charge the battery.
- USB Host
- USB Client
- Serial
- DC power in
Toggle to return you handheld settings to
the factory defaults.
Getting starte d
System tour
7