Table of Contents
Advertisement
User's Manual（Preliminary） IECUBE2 main (QB-V850E2)
1.3.7
Event link function (event combinations)
The event link function is used to combine into one event, events that have been registered by using the event
function. It is used to detect a specific sequence, such as when an address has been executed after a variable was
accessed.
1.3.8
Peripheral break function
When the break function has been used to stop program execution, peripheral functions other than the watchdog
timer continue to operate in general, but some peripheral functions can be stopped by using the peripheral break
function. Refer to POD user's manual which peripheral functions can be stopped.
1.3.9
Mask function
The mask function can be used to mask the following sources.
- _RESET terminal
- internal reset (For example, watch dog timer)
1.4
Block Overview
An internal block overview of the functions is described as below.
IECUBE2 main
IECUBE2 main
Firmware
Firmware
USB
USB
Block
Block
1.5
Package Contents
QB-V850E2 package includes the items below. The list contains only items which are delivered commonly to all
regions and that depending on region more items may be available. Therefore, confirm that the items in the attached
packing list.
Products supplied with QB-V850E2
1:
IECUBE2 main
2:
USB interface cable
3:
Stick for unplugging EA from POD
4:
Table of Toxic and Hazardous Substance and Elements
Figure 1-3. System Configuration
FPGA
FPGA
Control signals
Control signals
for debug chip
for debug chip
include trace
include trace
information
information
via cable of
via cable of
IECUBE2
IECUBE2
Trace
Trace
Memory
Memory
ZUD-CD-10-0092
POD
POD
Debug chip
Debug chip
Signals
Signals
of target
of target
device
device
via sockets
via sockets
Oscillator
Oscillator
13/19
Target
Target
System
System
Advertisement
Table of Contents
