Vector VectorPak CCA400-9U Manual

COMPLETE DIN SUBRACKS FULLY ASSEMBLED OR KITS
CCK Card Cage (subrack) frame only kit including sidewalls, front, rear and rear-center extrusions, all
nut strips, backplane insulators and assembly instructions. CG1-series VectorPak
separately. Guide positions are variable at 1HP (0.200") horizontal increments.
CCA Card cage (subrack) frame only described above , but factory assembled.
CG1-series VectorPak
VectorPak tm Kit (CCK)
CCA160-6U shown with 1 pr. of
CG1-160 card guides installed
34
www.vectorelect.com
Non EMC DIN-Based VectorPak
tm card guides sold separately
DIN-Based Metric Subrack Ordering Information
CCK
Model Type
CCK- Card cage frame kit
CCA- Factory Assembled
Specification subject to change without notice
Vector subrack packaging for 19"
systems offers a versatile and com-
prehensive solution to your packag-
ing needs. Based on DIN 41914,
all parts conform to a system which
allows your unique design to be
constructed from a combination of
standards. You may mix different
module sizes and add accessories
without the need for special
designs. Subracks and accessories
are available "off the shelf", afford-
ing you short lead times for on time
completion of your project.
- 160 3U
Card Depth
160 -160mm, 6.299"
220 -220mm, 8.66"
280- 280mm, 11.02"
340- 340mm, 13.39"
400- 400mm, 15.75"
CCA160-3U shown with 1 pr. of
CG1-160 card guides installed
800-423-5659
tm Subracks
tm card guides sold
Rack Height
3U = 5.25"H x 19.0"W
6U = 10.50"H x 19.0"W
9U = 15.75"H x 19.0"W
Standard Card Heights
3U = 100mm (3.94")
6U = 233.35mm (9.187")
9U = 366.70mm (14.437")