Send Dtmf Tones; Security; Request Pin Code - LG CG225 User Manual

Connecting TTY Equipment and a Terminal
1. Connect a TTY cable to TTY connection on the
terminal. (TTY connection location is same as a
hands free ear jack)
2. Enter the phone menu and set up the desired TTY
mode. (For a TTY mode, see the following)
3. After setting a TTY mode, check the LCD screen of
the phone for the TTY icon.
4. Connect the TTY equipment to the power source and
turn it on.
5. Make a phone connection to the desired number.
6. When connection is made, use the TTY equipment to
type in and send a text message or send voice.
7. The voice or text message from the receiver end
displays on the TTY equipment display.

Send DTMF Tones

(Menu 9.4.8)
You can send the DTMF (dual tone multi-frequency)
tones of the number on the display during a call.
This option is helpful for entering a password or
account number when you call an automated system,
like a banking service.

Security

Various codes and passwords are used to protect the
features of your phone. They are described in the
following sections (see pages 20)

Request PIN Code

(Menu 9.5.1)
When the PIN code request feature is is set to
'Enable', you must enter your PIN each time you switch
the phone on. Consequently, any person who does not
have your PIN cannot use your phone without your
approval.
n
Note
Before disabling the PIN code request feature, you must
enter your PIN
The following options are available:
]
Enable: You must enter the PIN each time the phone
is switched on.
]
Disable: The phone connects directly to the network
when you switch it on.
Settings
Menu 9.5
63