Advertisement
Quick Links
The VentCool whole house fan wall control uses temperature or a timer to control the whole house
fan. The wall control is installed in the sleeping space of the home and connects to the FC3JF
already installed on the VentCool whole house fan using a plug&play cable included.
In temperature control, the homeowner turns on the whole house fan and sets their comfort
temperature. The VentCool whole house fan will cool the home until the indoor temperature drops
just below the comfort temperature then turn off. A built-in safety timer will turn the fan off the
following morning in case the homeowner forgets. In timer control, the homeowner turns the fan
on and sets the timer interval. The fan will run for the time set then turn off. The WTT wall control is
also used to adjust the fan speed.
COMPONENTS:
1 - VentCool WTT Whole House Fan Wall Control [WTT] (p/n 580011702)
1 -
50 Foot RJ12 Plug&Play Cable [PNP50] (p/n 580011550)
1 - VentCool Logo cover plate
1 - Mounting hardware kit
1 - Installation and User Manual
**A
VentCool Fan Control Module [FC3JF] p/n (580011701) must be installed on
whole house fan assembly for this wall control (WTT) system to function properly.
READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.
This device MUST be installed by a qualified agency in accordance with the manufacturer's installation instructions.The definition of
a qualified agency is: any individual, firm, corporation or company which either in person or through a representative is engaged in,
and is responsible for, the installation and operation of HVAC applicances, who is experienced in such work, familiar with all the
precautions required, and has complied with all the requirements of the authority having jurisdiction.
Installed By:_______________________________________
INSTALLATION AND USER MANUAL
VentCool
Whole House Fan Wall Control
Cool Set To
SPEED
H
SPEED
MODE
ON/OFF
Please retain these instructions after installation.
Phone: _____________________
www.fieldcontrols.com
WTT
R
Indoors
ON
Installation Date: _____________
P/N 780104502 2/20 Rev A
Advertisement
Summary of Contents for Field Controls VentCool WTT
- Page 1 The fan will run for the time set then turn off. The WTT wall control is also used to adjust the fan speed. COMPONENTS: 1 - VentCool WTT Whole House Fan Wall Control [WTT] (p/n 580011702) 50 Foot RJ12 Plug&Play Cable [PNP50] (p/n 580011550) 1 - VentCool Logo cover plate...
- Page 2 HOMEOWNER SECTION This manual is separated into two different sections: one for the Homeowner and one for the Installer. The Homeowner section contains information on features and operation of the wall control. Before operating your whole house fan, be sure to open windows and close fireplace dampers. Refer to your whole house fan manual for more information regarding operating your fan.
- Page 3 INSTALLER SECTION This manual is separated into two different sections: one for the Homeowner and one for the Installer. The Homeowner section contains information on features and operation of the wall control. CAUTIONS Turn off power before installing whole house fan and controls. Installation should be performed by a qualified individual with sufficient experience and skill.
- Page 4 Replacement RTT wireless remote control. 580011707 580011550 PNP50 Cable 50 FT PNP50 VentCool This manual may be downloaded and printed from the Field Controls website (www.fieldcontrols.com) WARRANTY For warranty information about this or any Field Controls product, visit: www.fieldcontrols.com Field Controls Technical Support 1.800.742.8368...