D-Link DIR-843 Quick Installation Manual page 39

Mu-mimo wi-fi gigabit router
Table of Contents

Advertisement

DIR-843
5. IPv6 address assignment. By default, the devices of the LAN
automatically assign IPv6 addresses to themselves (the Stateless value
is selected from the Mode of dynamic IPv6 address assignment
drop-down list in the Dynamic IPv6 Addresses section on the IPv6
tab). If the devices of the LAN do not support IPv6 address
autoconfiguration, use the built-in DHCPv6 server of the router (select
the Stateful value from the Mode of dynamic IPv6 address
assignment drop-down list).
addresses to devices of the LAN, select the Disable value from the
Mode of dynamic IPv6 address assignment drop-down list.
6. After specifying the needed parameters on the Connections Setup /
LAN page, click the APPLY button.
Quick Installation Guide
If you want to manually assign IPv6
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wave 2 ac1200

Table of Contents