Notes On The Ce Symbol - Siemens SIMATIC PG 720 P Product Information Bulletin

Notes on the CE Symbol

The following applies to the SIMATIC product described in this manual:
EMC Directive
This product fulfils the requirements for the EC directive 89/336/EEC on
"electromagnetic compatibility" and the following fields of application apply
according to this CE symbol:
Residential, commercial,
and light industry.
Industry
Low Voltage
This product fulfils the requirements for the EC directive 73/23/EEC on "low
Directive
voltage" and was tested to EN60950.
Declaration of The EC declarations of conformity and the documentation relating to this are
Conformity available to the authorities concerned, according to the above EC directive,
Article 10 (1), from:
Observing the
The setup guidelines and notes on safety given in the manual must be observed
Setup Guidelines
on startup and during operation.
PG 720 P Product Information Bulletin
C79000-K7076-C721-01
Field of Application
Emitted Interference
EN 50081-1: 1992
EN 50081-2: 1993
Siemens AG
Automation Group
AUT E 14
Postfach 1963
D-92209 Amberg
Requirement For
Noise Immunity
EN 50082-1: 1992
EN 50082-2: 1995
19