4.2.5
Attaching and removing a display unit
This section describes a procedure for attaching a display unit on the CPU module.
Shut off the external power supply for the system in all phases before attaching or removing a display unit.
After removing the display unit, always attach a display unit dummy cover for protecting the connector.
(1) Attachment procedure
(2) Removal procedure
Change the display unit with the display unit dummy cover in the same manner of (1).
CHAPTER 4 INSTALLATION AND WIRING
1.
Release the display unit hook on the module top.
The hook clicks when released.
2.
Remove a display unit dummy cover.
Keeping the USB connector cover open will ease
removal of the unit.
3.
Embed the display unit straight into the CPU
module.
4.
Lock the display unit hook.
The hook clicks when locked.
4
39