Please ensure that this guide is operation of this appliance we recommend that any servicing fully understood before operating the appliance. or repairs are only carried out by an authorised Hoover service Do not leave the appliance plugged in. Always switch off and engineer.
1. GETTING TO KNOW YOUR CLEANER Thank you for purchasing your new Hoover upright vacuum cleaner HL5. MAIN COMPONENTS: A. Dust bin release button B. Cord storage hook upper C. Dust bin lid release button D. Accessory holder E. Cord storage hook lower F.
IMPORTANT: Accessories included are dependant on your model. Full specification 2. PREPARING YOUR CLEANER details for your product are included on your product packaging. Remove all product parts from the packaging and assemble your cleaner. STEP 1: STEP 2: STEP 3: STEP 4: STEP 5: Fit the main product unit into...
3. USING YOUR CLEANER 3.1 UPRIGHT MODE To use your product in Upright mode: STEP 1: STEP 2: STEP 5: Plug the power cord into the socket. Press the ON/OFF button to operate your Turn your cleaner off by pressing the ON/OFF Place your foot onto the nozzle and pull the handle cleaner.
There are 4 conditions of the brushbar status light during use in upright mode: 3. USING YOUR CLEANER 3.2 BRUSHBAR STATUS 1. OFF: the brushbar is turning, the nozzle LED lights are on. Your product is operating in hard floor mode. 2.
3. USING YOUR CLEANER 3.4 PUSH&LIFT ABOVE FLOOR MODE To use your product in PUSH&LIFT above floor mode: STEP 1: STEP 3: STEP 5: Place your product in the upright Remove the main unit from the Remove the handle & wand from position.
IMPORTANT: Before performing any maintenance task, always ensure your product is 4. CLEANER MAINTENANCE switched off and unplugged from the electricity supply. 4.1 DUST BIN Emptying the dust bin STEP 1: STEP 2: STEP 3: STEP 4: STEP 5: STEP 6: Press and hold Remove the Press the dust...
IMPORTANT: for optimum performance, always keep your filters clean. 4. CLEANER MAINTENANCE We recommend that the filters should be washed at least once a month. 4.3 FILTERS Cleaning the pre-motor filters STEP 1: STEP 2: STEP 3: STEP 5: STEP 6: Remove the dust Remove both Remove any...
4.4 BRUSHBAR Thanks to ANTI-TWIST, your new Hoover upright vacuum features an integrated comb which helps to prevent hair wrapping around the brushbar. However, if your cleaner is not picking up efficiently, or brushbar status light is red, your brushbar may need to be cleaned.
If your cleaner does cut out, perform all maintenance tasks contained in the manual before resuming.(see pages 8,9 &10) If there is any doubt call the Hoover Service Office for advice. They may be able to assist you over the telephone. A service charge will be made if the cleaner is examined and found to be in working order, has not been assembled in accordance with these instructions or has been used incorrectly.
Page 12
Printed in P.R.C. Part No. : 48035080-1...